NBR斜齒直角高精度精密行星

斜齒行星齒輪減速機：
1、輸入動力源：伺服電機、步進電機、直流電機及賓他
2、輸入方式：空心孔輸入、實心輸輸入、花鍵輸入
3、減速機本體：圓形本體 （ HL）、方形本體（PX)
4、輸出方式：空心孔輸出、實心輔輸出、脹緊套輸出、盤式輸出
5、安裝方式：水平安裝、豎直向下安裝、豎直向上安裝、帶地腳安裝
另外所有系列的外形尺寸僅作為客戶選擇參考，具體以雙方簽字確認的外形圖為準。

特點：
1 、 利用 Ansys 技術對齒輪強度進行有限元分析 ， 同時對螺旋齒面作齒形和導程修整， 以降低齒輪嚙合的沖擊和躁音， 增加齒輪系的使用壽命。
2、齒輪材料選用優質低碳合金鋼，經過滲碳淬火達到HRC60左右 ， 使用離精密機床加工， 保證齒輪的精度在IS05級以下， 從而獲得最佳的耐磨性相耐沖擊性；
3、齒圈與輸出法蘭采用一體化設計， 采用優質鋼穗，經熱鍛成形 ，從而獲得很高的材料密度。 體化設計能保證所有幾何尺寸 夾裝式等結何相比真萄更高的精度和強度；
4、行星輪軸承采用不含保持架之滿滾針輸承，增大速機輸出扭矩和剛性；
5、采用籠式行星架和輸出軸一體化， 兩端軸承支撐， 確保更高強度和精度；
6、輸入軸與電機采用份體式夾緊 ，經過動平衡測試，確保在高輸入轉速時的同軸度和零背隙動力傳動； 
7 、使用全合成油脂，餃IP65防滬等級的密封設計，確保潤滑油不泄漏免維護。


精密行星減速機系列：

具有高精度、高鋼性、高負載、高效率、高速比、高壽命、低慣性、低振動、低噪音、低溫升、外觀美、結構輕小、安裝方便、精確定位等特點。適用于交流伺服馬達、直流伺服馬達、步進馬達、液壓馬達的增速與減速傳動。適合于全球任何廠商所制造的驅動產品連接,如：松下、臺達、安川、富士、三菱、三洋、西門子、施耐德、法那克、科比、科爾摩根、AMK、帕克等等。

安裝為方形法蘭設計，安裝尺寸簡單方便。型號分：ZB40、60、90、115、142、190、240、280、330、400機座型號。速比：1-1000有19種比速可選擇;分一、二、三級變減速傳動;精度：一級傳動精度在6-8弧分，二級傳動精度在8-10弧分，三級傳動精度12-15弧分;等1000多種規格。

Helical planetary gear reducer:
1. Input power sources: servo motor, stepper motor, DC motor, and Penta
2. Input methods: hollow hole input, solid input, spline input
3. Gearbox body: circular body (HL), square body (PX)
4. Output methods: hollow hole output, solid auxiliary output, expansion sleeve output, disc output
5. Installation method: horizontal installation, vertical downward installation, vertical upward installation, and installation with feet

In addition, the external dimensions of all series are only for customer selection reference, and the specific external drawings confirmed by both parties shall prevail.

Features:

1. Using Ansys technology to conduct finite element analysis on gear strength, while modifying the tooth profile and lead of the spiral tooth surface, in order to reduce the impact and noise of gear meshing and increase the service life of the gear system.
2. The gear material is made of high-quality low-carbon alloy steel, which has been carburized and quenched to reach around HRC60. It is processed using high-precision machine tools to ensure that the accuracy of the gear is below IS05 level, thereby obtaining the best wear resistance and impact resistance;
3. The gear ring and output flange adopt an integrated design, using high-quality steel spikes that are hot forged to achieve high material density. Body design can ensure higher accuracy and strength in all geometric dimensions of clamping structures compared to real grapes;
4. The planetary gear bearings adopt full needle roller bearings without retaining frames to increase the output torque and rigidity of the high-speed machine;
5. Adopting a cage type planetary carrier and integrated output shaft, supported by bearings at both ends, ensuring higher strength and accuracy;
6. The input shaft and motor are clamped in a split type and undergo dynamic balance testing to ensure coaxiality and zero backlash power transmission at high input speeds;
7. Using fully synthetic grease, the dumpling has an IP65 anti Shanghai sealing design, ensuring that the lubricating oil does not leak and is maintenance free.

Precision planetary reducer series:

It has the characteristics of high precision, high rigidity, high load, high efficiency, high speed ratio, long service life, low inertia, low vibration, low noise, low temperature rise, beautiful appearance, light and small structure, convenient installation, and precise positioning. Suitable for increasing and decreasing speed transmission of AC servo motors, DC servo motors, stepper motors, and hydraulic motors. Suitable for connecting drive products manufactured by any manufacturer worldwide, such as Panasonic, Delta, Yaskawa, Fuji, Mitsubishi, Sanyo, Siemens, Schneider, Fanuc, Kobe, Morgan, AMK, Parker, and more.

The installation is designed with a square flange, and the installation size is simple and convenient. Model classification: ZB40, 60, 90, 115, 142, 190, 240, 280, 330, 400 base models. Speed ratio: There are 19 speed ratios to choose from between 1-1000; Divided into one, two, and three levels of variable speed drive; Accuracy: The first level transmission accuracy is 6-8 arc minutes, the second level transmission accuracy is 8-10 arc minutes, and the third level transmission accuracy is 12-15 arc minutes; Waiting for over 1000 specifications.